LED Display Products
Professional LED display hardware for indoor and outdoor applications. Full technical specifications for every product in our range.
LED Display Product Range
This page introduces the LED display product categories available from LEDSCREEN.ASIA, including indoor, outdoor and fine-pitch LED screens. When comparing products, consider viewing distance, pixel pitch, installation environment and maintenance requirements — these factors determine which specification suits your application. Use the comparison table below to review key specifications across our product range, then explore the selection guidance and real installation examples further down the page.
| Product | Pixel Pitch | Brightness | Refresh Rate | Cabinet Type | Category |
|---|---|---|---|---|---|
| P1.5 Fine Pitch LED Wall | P1.5 | Configuration-dependent | 3,840 Hz | Die-cast aluminium | Indoor |
| P1.8 Fine Pitch LED Wall | P1.8 | 1,000 nits | 3,840 Hz | Die-cast aluminium | Indoor |
| P2.0 Indoor LED Wall | P2.0 | 1,200 nits | 3,840 Hz | Die-cast aluminium | Indoor |
| P2.5 Indoor LED Wall | P2.5 | 1,500 nits | Configuration-dependent | Die-cast aluminium | Indoor |
| P3 Outdoor LED Display | P3.0 | Configuration-dependent | Configuration-dependent | Configuration-dependent | Outdoor |
| P4 Outdoor LED Display | P4.0 | Configuration-dependent | Configuration-dependent | Configuration-dependent | Outdoor |
| P6 Outdoor LED Billboard | P6.0 | 8,000 nits | 3,840 Hz | Weatherproof steel | Outdoor |
| P8 Outdoor LED Billboard | P8.0 | 10,000 nits | 3,840 Hz | Weatherproof steel | Outdoor |
| P10 Highway Billboard | P10 | 10,000 nits | 3,840 Hz | Weatherproof steel | Outdoor |
Specifications may vary according to the selected product configuration. Final technical specifications will be confirmed during consultation and quotation.
Indoor LED Displays
Fine-pitch LED walls for boardrooms, auditoriums, and control rooms.
View Indoor SolutionsOutdoor LED Displays
Weatherproof high-brightness LED screens for outdoor environments.
View Outdoor SolutionsFine Pitch LED
Ultra-high-resolution P1.25 to P2 LED for close-viewing applications.
View Fine Pitch SolutionsDigital Billboard
Large-format outdoor LED billboards for highway and building-mounted advertising.
View Digital Billboard SolutionsChoosing the Right LED Display
Comparing LED display products is easier when the key selection factors are clear. The points below explain what to consider when reading the specification table — for a detailed breakdown of pixel pitch and viewing distance, see our LED screen pixel pitch guide.
Pixel pitch and resolution
Pixel pitch is the distance between adjacent LED pixels, measured in millimetres — a P2 LED display has a 2 mm pitch. A smaller pitch places more pixels in the same area, producing a higher-resolution LED screen wall that stays sharp at closer viewing distances.
Viewing distance
The right pitch depends on how far the audience sits from the screen. Closer viewing needs a finer pitch; distant viewing, such as a highway billboard, can use a coarser pitch. Matching pitch to viewing distance avoids paying for resolution the audience cannot perceive.
Indoor vs outdoor environments
Indoor LED screen panels operate in controlled lighting and typically use lower brightness and lighter cabinets. Outdoor LED displays must overcome direct sunlight, so they need higher brightness and weatherproof enclosures rated for rain, dust and wind load.
Brightness by installation condition
Brightness should match the ambient light at the site — a daylight-lit lobby or storefront needs more brightness than a dim auditorium. Specifying brightness around the actual environment, rather than maximising it, balances visibility with cost and power use.
Maintenance and installation
Installation method and service access matter for long-term reliability. Wall-mounted indoor LED walls often need front-serviceable cabinets, while outdoor screens require safe access for rear or front maintenance depending on the structure.
Real LED Display Installations
The product table above lists generic specifications across our product range. The examples below are completed installations — each project’s actual specifications are documented on its own project page and may differ from the generic table values depending on the confirmed product configuration and site.
P2 Indoor
P2.5 Indoor
Product Selection FAQ
Explore More
LED Display Solutions
Browse indoor, outdoor, fine-pitch and digital billboard solutions.
Learn moreLED Display Applications
See how LED displays are used across industries in Malaysia.
Learn moreLED Display Projects
View completed LED display installations across Malaysia.
Learn moreLED Display Resources
Read guides on pixel pitch, display selection and LED technology.
Learn moreReady to Discuss Your LED Display Project?
Contact LEDSCREEN.ASIA for professional consultation, system design, and a tailored quotation for your LED display requirements in Malaysia.